220 documents found in 793ms
# 1
Geiger, Tobias • Frieler, Katja
Abstract: Version history:This data are a new version of Geiger et al (2017, http:doi.org/10.5880/PIK.2017.003). Please use this updated version of this dataset which contains the following correction of errors in the original dataset: The linear interpolation in GDP per capita for Aruba (ABW) between observations in 2005 and SSP2 projections in 2010 was replaced by observed GDP per capita values for the years 2006-2009, as the SSP2 projection for Aruba turned out to be incorrect. As a result of this, the national GDP per capita and GDP timeseries for Aruba between 2006 and 2009 is different from the previous version. We here provide three different economic time series that amend or combine various existing time series for Gross Domestic Product (GDP), GDP per capita, and population to create consistent and continuous economic time series between 1850 and 2009 for up to 195 countries. All data, including the data description are included in a zip folder (2018-010_GDP_1850-2009_Data_v2.zip): (1) A continuous table of global income data (in 1990 Geary-Khamis $) based on the Maddison Project data base (MPD) for 160 individual countries and 3 groups of countries from 1850-2010: Maddison_Project_data_completed_1850-2010.csv. (2) A continuous table of global income data (in 2005 PPP $, PPP = purchasing power parity) for 195 countries based on a merged and harmonized dataset between MPD and Penn World Tables (PWT, version v8.1) from 1850-2009, and additionally extended using PWT v9.0 and World Development Indicators (WDI), that is consistent with future GDP per capita projections from the Shared Socioeconomic Pathways (SSPs): GDP-per-capita-national_PPP2005_SSP-harmonized_1850-2009_v2.csv. (3) A continuous table of global GDP data (in 2005 PPP $) for 195 countries from 1850-2009 based on the second income data set multiplied by country population data, again consistent with future SSP GDP projections: GDP-national_PPP2005_SSP-harmonized_1850-2009_v2.csv. These data are supplemented by a masking table indicating MPD original data and amended data based on current country definitions (Maddison_data_availability_masked_1850-2010.csv) and a file with PPP conversion factors used in this study (PPP_conversion_factors_PPP1990-PPP2005.csv). We use various interpolation and extrapolation methods to handle missing data and discuss the advantages and limitations of our methodology. Despite known shortcomings this data set aims to provide valuable input, e.g., for climate impact research in order to consistently analyze economic impacts from pre-industrial times to the distant future. More information about data sources and data format description is given in the data description file (2018-010_Data-Description-GDP_1850-2009_v2.pdf).
# 2
Blanchet, Cécile L.
Abstract: The database presented here contains radiogenic neodymium and strontium isotope ratios measured on both terrestrial and marine sediments. It was compiled to help assessing sediment provenance and transport processes for various time intervals. This can be achieved by either mapping sediment isotopic signature and/or fingerprinting source areas using statistical tools (see supplemental references). The database has been built by incorporating data from the literature and the SedDB database and harmonizing the metadata, especially units and geographical coordinates. The original data were processed in three steps. Firstly, a specific attention has been devoted to provide geographical coordinates to each sample in order to be able to map the data. When available, the original geographical coordinates from the reference (generally DMS coordinates, with different precision standard) were transferred into the decimal degrees system. When coordinates were not provided, an approximate location was derived from available information in the original publication. Secondly, all samples were assigned a set of standardized criteria that help splitting the dataset in specific categories. We defined categories associated with the sample location ("Region", "Sub-region", "Location", which relate to location at continental to city/river scale) or with the sample types (terrestrial samples – “aerosols”, “soil sediments”, “river sediments” - or marine samples –“marine sediment” or “trap sample”). Thirdly, samples were discriminated according to their deposition age, which allowed to compute average values for specific time intervals (see attached table "Age_determination_Sediment_Cores.csv"). The dataset will be updated bi-annually and might be extended to reach a global geographical extent and/or add other type of samples. This dataset contains two csv tables: "Dataset_Nd_Sr_isotopes.csv" and "Age_determination_Sediment_Cores.csv". "Dataset_Nd_Sr_isotopes.csv" contains the assembled dataset of marine and terrestrial Nd and/or Sr concentration and isotopes, together with sorting criteria and geographical locations. "Age_determination_Sediment_Cores.csv" contains all background information concerning the determination of the isotopic signature of specific time intervals (depth interval, number of samples, mean and standard deviation). Column headers are explained in respective metadata comma-separated files. A human readable data description is provided in portable document format, as well. Finally, R code for mapping the data and running statistical analyses is also available for this dataset (see supplemental references).
# 3
Broerse, Taco • Norder, Ben • Picken, Stephen • Govers, Rob • Willingshofer, Ernst • (et. al.)
Abstract: This dataset provides strain and strain rate data on mixtures of plasticine, silicone oils and iron powder that has been used in slab break-of analogue experiments in the Tectonic Laboratory (TecLab) at Utrecht University (NL) as an analogue for viscously deforming lithosphere. The materials have been analyzed in a creep and recovery test, applying a parallel plate setup using an AR-G2 rheometer (by TA Instruments). The materials can in general be described as viscoelastic materials with a power-law rheology (see previous work on plasticine-silicone polymer mixtures Weijermars [1986], Sokoutis [1987], Boutelier et al. [2008]). For a couple of the tested materials we find a complementary Newtonian behavior at the low end of the tested stress levels, with a transition to power-law behavior at increasing stress. Furthermore, the materials exhibit elastic and anelastic (recoverable) deformation. The corresponding paper (Broerse et al., 2018) describes the rheology, while this supplement describes the raw data and important details of the measurement setup. The raw data concerns mostly (uncorrected) strain and strain rate data. The rheometry has been performed at the Advanced Soft Matter group at the Department of Chemical Engineering, Delft University of Technology, The Netherlands.
# 4
Porwollik, Vera • Rolinski, Susanne • Müller, Christoph
Abstract: Tillage is a central element in agricultural soil management and has direct and indirect effects on processes in the biosphere. Effects of agricultural soil management can be assessed by soil, crop, and ecosystem models but global assessments are hampered by lack of information on type and spatial distribution. This dataset is the result of a study on global classification of tillage practices and the spatially explicit mapping of crop-specific tillage systems for around the year 2005. This global gridded tillage system data set is dedicated to modeling communities interested in the quantitative assessment of biophysical and biogeochemical impacts of land use and soil management on cropland. The data set is complemented by the publication of the R- code and can be used for reproducing and build upon for scenarios including the expansion of sustainable soil management practices as Conservation Agriculture (Porwollik et al. 2018, http://doi.org/10.5880/PIK.2018.013). Both, the data set and the R-code are described in detail in Porwollik et al. (2018, ESSD). We present the mapping result of six tillage systems for 42 crop types and potential suitable Conservation Agriculture area as the following variables: We present the mapping result of six tillage systems for 42 crop types and potentially suitable Conservation Agriculture area as variables:1 = conventional annual tillage2 = traditional annual tillage3 = reduced tillage4 = Conservation Agriculture5 = rotational tillage6 = traditional rotational tillage7 = potential suitable Conservation Agriculture area Reference system: WGS84Geographic extent: Longitude (min, max) (-180, 180), Latitude (min, max) (-56, 84)Resolution: 5 arc-minutesTime period covered: around the year 2005Type: NetCDF Dataset sources (with indication of reference): 1. Grid cell allocation key to country: IFPRI/IIASA (2017, cell5m_allockey_xy.dbf.zip)2. Crop-specific physical cropland: IFPRI/IIASA (2017, spam2005v3r1_global_phys_area.geotiff.zip)3. SoilGrids depth to bedrock: Hengl et al. (2014)4. Aridity index: FAO (2015)5. Conservation Agriculture area: FAO (2016)6. Income level: World Bank (2017)7. Field size: Fritz et al. (2015)8. Water erosion: Nachtergaele et al. (2011)
This tillage dataset is made available under the Open Database License: http://opendatacommons.org/licenses/odbl/1.0/. Any rights in individual contents of the database are licensed under the Database Contents License: http://opendatacommons.org/licenses/dbcl/1.0/.
# 5
Pijnenburg, Ronald • Verberne, Berend • Hangx, Suzanne • Spiers, Christopher
Abstract: Hydrocarbon or groundwater production from sandstone reservoirs can result in surface subsidence and induced seismicity. Subsidence results from combined elastic and inelastic compaction of the reservoir due to a change in the effective stress state upon fluid extraction. The magnitude of elastic compaction can be accurately described using poroelasticity theory. However inelastic or time-dependent compaction is poorly constrained. We use sandstones recovered by the field operator (NAM) from the Slochteren gas reservoir (Groningen, NE Netherlands) to study the importance of elastic versus inelastic deformation processes upon simulated pore pressure depletion. We conducted conventional triaxial tests under true in-situ conditions of pressure and temperature. To investigate the effect of applied differential stress (σ1 – σ3 = 0 - 50 MPa) and initial sample porosity (φi = 12 – 25%) on instantaneous and time-dependent inelastic deformation, we imposed multiple stages of axial loading and relaxation. The obtained data include:1) Mechanical data obtained in conventional triaxial compression experiments performed on reservoir sandstone. In these experiments, we imposed multiple stages of active loading, each followed by 24 hours of stress relaxation.2) Microstructural data obtained on undeformed and deformed samples.
# 6
Corbi, Fabio • Sandri, Laura • Bedford, Jonathan • Funiciello, Francesca • Brizzi, Silvia • (et. al.)
Abstract: This data set includes the results of digital image correlation of one experiment on subduction megathrust earthquakes with interacting asperities performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034) lead by F. Corbi in 2016-2017. Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017 and 2019) to which this data set is supplementary material. We here provide Digital Image Correlation (DIC) data relative to a 7 min long interval during which the experiment 
produces 40 seismic cycles with average duration of about 10.5 s (see Figure S1 in Corbi et al., 2019). The DIC analysis yields quantitative about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying the correlation between apparent slip-deficit maps and earthquake slip pattern (see Corbi et al., 2019; paragraph 4); and b) as input for the Machine Learning investigation (see Corbi et al., 2019; paragraph 5). Further technical information about the methods, data products and matlab scripts is proviced in the data description file. The list of files explains the file and folder structure of the data set.
# 7
Rosenau, Matthias • Pohlenz, Andre • Kemnitz, Helga • Warsitzka, Michael
Abstract: This dataset provides friction data from ring-shear tests (RST) for a quartz sand (type “G23”). This material is used in various types of analogue experiments in the Helmholtz Laboratory for Tectonic Modelling (HelTec) at the GFZ German Research Centre for Geosciences in Potsdam for simulating brittle rocks in the upper crust (e,g. Kenkmann et al., 2007; Contardo et al., 2011; Reiter et al., 2011;Warsitzka et al., 2013; Santimano,et al., 2015; Warsitzka et al., 2015; Ritter et al., 2016; 2018 a,b). The material has been characterized by means of internal friction coefficients µ and cohesions C. According to our analysis the material shows a Mohr-Coulomb behaviour characterized by a linear failure envelope and peak, dynamic and reactivation friction coefficients of µP = 0.73, µD = 0.57 and µR = 0.65, respectively. Cohesions C are in the order of 10 – 120 Pa. The material shows a minor rate-weakening of <1% per ten-fold change in shear velocity v. Further information about materical characteristics, measurement procedures, sample preparation, the RST (Ring-shear test) and VST (Velocity stepping test) procedure, as well as the analysed method is proviced in the data description file. The list of files explains the file and folder structure of the data set.
# 8
Dahle, Christoph • Flechtner, Frank • Murböck, Michael • Michalak, Grzegorz • Neumayer, Hans • (et. al.)
Abstract: Spherical harmonic coefficients representing an estimate of Earth's mean gravity field during the specified timespan derived from GRACE mission measurements. These coefficients represent the full magnitude of land hydrology, ice, and solid Earth processes. Further, they represent atmospheric and oceanic processes not captured in the accompanying GAC product.
# 9
Rudenko, Sergei • Schöne, Tilo • Esselborn, Saskia • Neumayer, Karl Hans
Abstract: The data set provides GFZ VER13 orbits of altimetry satellites: ERS-1 (August 1, 1991 - July 5, 1996),ERS-2 (May 13, 1995 - February 27, 2006),Envisat (April 12, 2002 - April 8, 2012),TOPEX/Poseidon (September 23, 1992 - October 8, 2005),Jason-1 (January 13, 2002 - July 5, 2013) andJason-2 (July 5, 2008 - April 5, 2015) derived at the time spans given at the GFZ German Research Centre for Geosciences (Potsdam, Germany) within the Sea Level phase 2 project of the European Space Agency (ESA) Climate Change Initiative using "Earth Parameter and Orbit System - Orbit Computation (EPOS-OC)" software (Zhu et al., 2004) and the Altimeter Database and processing System (ADS, http://adsc.gfz-potsdam.de/ads/) developed at GFZ. The orbits were computed in the ITRF2014 terrestrial reference frame for all satellites using common, most precise models and standards available and described below. The ERS-1 orbit is computed using satellite laser ranging (SLR) and altimeter crossover data, while the ERS-2 orbit is derived using additionally Precise Range And Range-rate Equipment (PRARE) measurements. The Envisat, TOPEX/Poseidon, Jason-1, and Jason-2 orbits are based on Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) and SLR observations. For Envisat, altimeter crossover data were used additionally at 44 of 764 orbital arcs with gaps in SLR and DORIS data. The orbit files are available in the Extended Standard Product 3 Orbit Format (SP3-c). Files are gzip-compressed. File names are given as sate_YYYYMMDD_SP3C.gz, where "sate" is the abbreviation (ENVI, ERS1, ERS2, JAS1, JAS2, TOPX) of the satellite name, YYYY stands for 4-digit year, MM for month and DD for day of the beginning of the file. More details on these orbits are provided in Rudenko et al. (2018) to which these orbits are supplementary material.
# 10
Frick, Daniel A. • Schuessler, Jan A. • Sommer, Michael • von Blanckenburg, Friedhelm
Abstract: Silicon is a beneficial element for many plants, and is deposited in plant tissue as amorphous bio-opal (phytoliths). The biochemical processes of uptake and precipitation induce isotope fractionation: the mass-dependent shift in the relative abundances of the stable isotopes of silicon. At the bulk scale, the silicon isotope composition reported as δ30Si span from -2 to +6 ‰. To further constrain these variations, at the scale of individual phytolith fragments we applied in situ femtosecond laser ablation multicollector inductively coupled plasma mass spectrometry (fsLA-MC-ICP-MS) to a set of 7 natural phytolith samples. Two phytoliths samples (Norway spruce Picea abies and European beech Fagus sylvatica L.) were extracted from the organic-rich topsoil horizon (O) of two studies sites in Germany (Beerenbusch, close to village Rheinsberg and Wildmooswald, in the southern Black Forest). The other five phytolith samples (bushgrass Calamagrostis epigejos, common reed Phragmites australis, common horsetail Equisetum arvense, annual and perennial rough horsetail Equisetum hyemale) were separated from plant materials. The individual phytolith fragments were analysed by fsLA-MC-ICP-MS and Si isotope results are reported in the δ-notation (delta) as permil deviation relative to NIST SRM610, which is isotopically indistinguishable from the reference material NBS28 (quartz NIST SRM8546 alias NBS28, δ29Si ≡ 0 and δ30Si ≡ 0). Raw data processing and background corrections were made according to the protocol described in Schuessler and von Blanckenburg (2014) that also involves application of several data rejection/acceptance criteria. Of these, the most important ones are that A) only 30/28Si and 29/28Si ratios are used for the calculation which deviate less than 3 standard deviation from the mean and B) only results which follow the mass-depended terrestrial fractionation line in a three-isotope-plot of δ29Si vs. δ30Si within analytical uncertainties and C) have a mass bias drift between the two bracketing standards of less than 0.30 ‰ in 30/28Si are accepted and reported in this study. Detailed description of the sample origin, preparation steps, and the measurement protocol can be found in Frick, D. A.; Schuessler, J. A.; Sommer, M.; von Blanckenburg, F. (2018): Laser ablation in situ silicon stable isotope analysis of phytoliths. Geostandards and Geoanalytical Research. https://doi.org/10.1111/ggr.12243. With this supplement we aim to provide a comprehensive dataset for in situ stable silicon isotope composition of individual phytolith fragments.
spinning wheel Loading next page