89 documents found in 384ms
# 1
Reyer, Christopher • Asrar, Gassem • Betts, Richard • Chang, Jinfeng • Chen, Min • (et. al.)
Abstract: The Inter-Sectoral Impact Model Intercomparison Project (ISIMIP) provides a framework for the collation of a set of consistent, multi-sector, multi-scale climate-impact simulations, based on scientifically and politically-relevant historical and future scenarios. This framework serves as a basis for robust projections of climate impacts, as well as facilitating model evaluation and improvement, allowing for improved estimates of the biophysical and socio-economic impacts of climate change at different levels of global warming. It also provides a unique opportunity to consider interactions between climate change impacts across sectors. ISIMIP2a is the second ISIMIP simulation round, focusing on historical simulations (1971-2010) of climate impacts on agriculture, fisheries, permafrost, biomes, regional and global water and forests. This will serve as a basis for model evaluation and improvement, allowing for improved estimates of the biophysical and socio-economic impacts of climate change at different levels of global warming. The focus topic for ISIMIP2a is model validation, in particular with respect to the representation of impacts of extreme weather events and climate variability. During this phase, four common global observational climate data sets were provided across all impact models and sectors. In addition, appropriate observational data sets of impacts for each sector were collected, against which the models can be benchmarked. Access to all these data is provided through a central ISIMIP archive (see https://www.isimip.org/gettingstarted/#input-data-bias-correction). The ISIMIP2a biome outputs are based on simulations from 8 global vegetation (biomes) models (CARAIB, DLEM, JULES-B1, LPJ-GUESS, LPJmL, ORCHIDEE, VEGAS, VISIT) according to the ISIMIP2a protocol (https://www.isimip.org/protocol/#isimip2a).
The ISIMIP2a biome outputs are based on simulations by different global vegetation models (CARAIB, DLEM, JULES-UoE, LPJ-GUESS, LPJmL, ORCHIDEE, VEGAS, VISIT) following the ISIMIP2a protocol. The biome models simulate biogeochemical processes, biogeography and ecosystem dynamics of natural vegetation and managed lands based on soil, climate and land-use information. A more detailed description of the models and model-specific amendments of the protocol are available here: https://www.isimip.org/impactmodels/.
# 2
Gosling, Simon • Müller Schmied, Hannes • Betts, Richard • Chang, Jinfeng • Ciais, Philippe • (et. al.)
Abstract: The Inter-Sectoral Impact Model Intercomparison Project (ISIMIP) provides a framework for the collation of a set of consistent, multi-sector, multi-scale climate-impact simulations, based on scientifically and politically-relevant historical and future scenarios. This framework serves as a basis for robust projections of climate impacts, as well as facilitating model evaluation and improvement, allowing for improved estimates of the biophysical and socio-economic impacts of climate change at different levels of global warming. It also provides a unique opportunity to consider interactions between climate change impacts across sectors. ISIMIP2a is the second ISIMIP simulation round, focusing on historical simulations (1971-2010 approx.) of climate impacts on agriculture, fisheries, permafrost, biomes, regional and global water and forests. This may serve as a basis for model evaluation and improvement, allowing for improved estimates of the biophysical and socio-economic impacts of climate change at different levels of global warming. The focus topic for ISIMIP2a is model evaluation and validation, in particular with respect to the representation of impacts of extreme weather events and climate variability. During this phase, four common global observational climate data sets were provided across all impact models and sectors. In addition, appropriate observational data sets of impacts for each sector were collected, against which the models can be benchmarked. Access to the input data for the impact models is provided through a central ISIMIP archive (see https://www.isimip.org/gettingstarted/#input-data-bias-correction). This entry refers to the ISIMIP2a simulation data from global hydrology models: CLM4, DBH, H08, JULES_W1, JULES_B1, LPJmL, MATSIRO, MPI-HM, ORCHIDEE, PCR-GLOBWB, SWBM, VIC, WaterGAP2.
The ISIMIP2a water (global) outputs are based on simulations from 13 global hydrology models (see listing) according to the ISIMIP2a protocol (https://www.isimip.org/protocol/#isimip2a). The models simulate hydrological processes and dynamics (part of the models also considering human water abstractions and reservoir regulation) based on climate and physio-geographical information. A more detailed description of the models and model-specific amendments of the protocol are available here: https://www.isimip.org/impactmodels/.
# 3
Quinteros, Javier
Abstract: This service provides routing information for distributed data centres, in the case where multiple different seismic data centres offer access to data and products using compatible types of services. Examples of the data and product objects are seismic timeseries waveforms, station inventory, or quality parameters from the waveforms. The European Integrated Data Archive (EIDA) is an example of a set of distributed data centres (the EIDA „nodes“). EIDA have offered Arclink and Seedlink services for many years, and now offers FDSN web services, for accessing their holdings. In keeping with the distributed nature of EIDA, these services could run at different nodes or elsewhere; even on computers from normal users. Depending on the type of service, these may only provide information about a reduced subset of all the available waveforms. To be effective, the Routing Service must know the locations of all services integrated into a system and serve this information in order to help the development of smart clients and/or services at a higher level, which can offer the user an integrated view of the entire system (EIDA), hiding the complexity of its internal structure. The service is intended to be open and able to be queried by anyone without the need of credentials or authentication.
# 4
Sembroni, Andrea • Kiraly, Agnes • Faccenna, Claudio • Funiciello, Francesca • Becker, Thorsten W. • (et. al.)
Abstract: We present videos and figures from 22 scaled analogue models used to investigate the interactions between a density anomaly rising in the mantle and the lithosphere in a Newtonian system. The experimental setup consists of a two layers viscous lithosphere-upper mantle system obtained by using silicone putty-glucose syrup in a tank sized 40 cm × 40 cm× 50 cm. Glucose syrup (i.e., mantle) is a Newtonian, low viscosity, high-density fluid while silicone putty (i.e., lithosphere) is a visco-elastic material that behaves in a quasi-Newtonian fashion. The mantle upwelling (i.e., plume head) is produced by a high viscosity, low-density silicone sphere with a constant radius (15 mm) rising through the mantle at an average rise velocity of ~2.6 mm/s. A side-view camera images the ascending path of the sphere, allowing to track the sphere location and compute its velocity. A top-view, 3-D scanner records the evolution of topography from which the lithospheric uplift rate is inferred. All details about the model set-up, modeling results and interpretation are detailed in Sembroni et al. (2017). The additional material presented in this publication includes 2 tables, 5 figures, and 23 time-lapse movie. The rheological properties of materials used in each model are listed in Table 1.Table 2 is an excel file where the raw data of the models are specified (i.e., bulge width, topography, and uplift rate). Such data have been obtained by the 3-D scanner and then processed by a MATLAB code.Figure 1, Figure 2, Figure 3, Figure 4, Figure 5 represent the 2-D topography evolution of the bulge in each experiment. Images have been grouped by considering the different experimental setups (i.e., homogeneous continental lithosphere - Figure 1, homogeneous oceanic lithosphere - Figure 2, low viscous decoupling layer - Figure 3, intermediate viscous decoupling layer - Figure 4, high viscous decoupling layer - Figure 5). Such figures consist of topographic profiles extracted from the surface obtained by the 3-D scanner in four different time steps (red numbers in the figures). 22 side-view videos (from Movie 1 to Movie 22) show the progress of the models from the releasing to the impingement of the sphere beneath the plate. The velocity of the video has been accelerated by a factor of 7. While, the first 22 movies show the evolution of the experiments, Movie 23 shows the mantle convective flow associated to the ascending path of the mantle upwelling. Such flow has been detected by tracking the bubbles inside the syrup. In this model, no lithosphere has been placed on top of the syrup.
# 5
Lu, Biao • Luo, Zhicai • Zhong, Bo • Zhou, Hao • Förste, Christoph • (et. al.)
Abstract: IGGT_R1 is a static gravity field model based on the second invariant of the GOCE gravitational gradient tensor, up to degree and order 240. Based on tensor theory, three invariants of the gravitational gradient tensor (IGGT) are independent of the gradiometer reference frame (GRF). Compared to traditional methods for calculation of gravity field models based on GOCE data, which are affected by errors in the attitude indicator, using IGGT and least squares method avoids the problem of inaccurate rotation matrices. IGGT_R1 is the first experiment to use this method to build a real gravity field model by using GOCE gravitational gradients. This new model has been developed by Wuhan University (WHU), GFZ German Research Centre for Geosciences (GFZ), Technical University of Berlin (TUB), Huazhong University of Science and Technology (HUST) and Zhengzhou Information Engineering University (IEU). More details about the gravity field model IGGT_R1 is given in our paper “The gravity field model IGGT_R1 based on the second invariant of the GOCE gravitational gradient tensor” (Lu et al., 2017, http://doi.org/10.1007/s00190-017-1089-8). This work is supported by the Chinese Scholarship Council (No. 201506270158), the Natural Science Foundation of China (Nos. 41104014, 41131067, 41374023, 41474019 and 41504013) and the Key Laboratory of Geospace Environment and Geodesy, Ministry Education, Wuhan University (No. 16-02-07).
# 6
Hinzen, Klaus-G. • Fleischer, Claus
Abstract: Engineering seismological models (incl. ground amplification and topographic effects) of key structures in Tiryns and Midea, Greece, will be used to test the hypothesis of seismogenic causes of the decline of the Mycenaean settlements in the 12th century BC.
# 7
Bernd Schurr • Anke Dannowski • Branislav Glavatovic • Llambro Duni • Heidrun Kopp • (et. al.)
Abstract: Raw-, SEG-Y and other supplementary data of the landside deployment from the amphibious wide-angle seismic experiment ALPHA are presented. The aim of this project was to reveal the crustal and lithospheric structure of the subducting Adriatic plate and the external accretionary wedge in the southern Dinarides. Airgun shots from the RV Meteor were recorded along two profiles across Montenegro and northern Albania.
# 8
Andreas Köhler • Christian Weidle • Christopher Nuth
Abstract: Climatic change is of incredible importance in the polar regions as ice-sheets and glaciers respond strongly to change in average temperature. The analysis of seismic signals (icequakes) emitted by glaciers (i.e., cryo-seismology) is thus gaining importance as a tool for monitoring glacier activity. To understand the scaling relation between regional glacier-related seismicity and actual small-scale local glacier dynamics and to calibrate the identified classes of icequakes to locally observed waveforms, a temporary passive seismic monitoring experiment was conducted in the vicinity of the calving front of Kronebreen, one of the fastest tidewater glaciers on Svalbard (Fig. 1). By combining the local observations with recordings of the nearby GEOFON station GE.KBS, the local experiment provides an ideal link between local observations at the glacier to regional scale monitoring of NW Spitsbergen. During the 4-month operation period from May to September 2013, eight broadband seismometers and three 4-point short-period arrays were operating around the glacier front of Kronebreen.
# 9
Ritter, Malte C. • Rosenau, Matthias • Oncken, Onno
Abstract: This dataset is supplementary material to the article of Ritter et al. (2017). In this article, the similarity of fault propagation work in analogue sandbox experiments to natural fault networks is investigated through measurements in a strike-slip sandbox and in a ring-shear-tester. The transient shear strength of the samples is measured for different fault lengths and from this the work is determined. For a detailed description of the procedure and the set-up please see Ritter et al. (2017). The data available in this supplementary publication are:• For the strike-slip experiments three video sequences of the deformation together with the evolution of boundary force for fault lengths of 20 cm, 30 cm and 40 cm. The videos show the curl of the deformation field, determined by Digital Image Correlation of top-view video images. These files are in AVI-format and included in the zip folder 2017-005-Ritter-movies.zip.• A folder containing force vs. displacement measurements for each experiment (2017-005-Ritter-forces.zip). These are 25 ASCII-files that contain two columns of numerical data: the first column is the displacement in meter; the second column is the corresponding force in newton. The files are named according to the following pattern: <fault length in meter>_<experiment number>.asc• A Matlab script to load the force files and calculate the work. This file is called “plotwork.m” and calls the Matlab function “work.m”, which does the actual calculations. These files have been tested in Matlab version 2012b. The surface deformation data are available upon request.
# 10
Ritter, Malte Christian • Santimano, Tasca • Rosenau, Matthias • Leever, Karen • Oncken, Onno
Abstract: This dataset is supplementary to the article of Ritter et al. (2017). In this article, a new experimental device is presented that facilitates precise measurements of boundary forces and surface deformation at high temporal and spatial resolution. This supplementary dataset contains the measurement data from two experiments carried out in this new experimental device: one experiment of an accretionary critical wedge and one of Riedel-type strike-slip deformation. For a detailed description of the set-up and an analysis of the data, please see Ritter et al. (2017). The data available for either experiment are:• A video showing deformation in top view together with the evolution of boundary force. This file is in AVI-format.• A time-series of 2D vector fields describing the surface deformation. These vector fields were obtained from top-view video images of the respective experiment by means of digital image correlation (DIC). Each vector field is contained in a separate file; the files are consecutively numbered. The vector fields are stored in *.mat-files that can be opened using e.g. the software Matlab or the freely available GNU Octave. They take the form of Matlab structure arrays and are compatible to the PIVmat-toolbox by Moisy (2016) that is freely available. The most important fields of the structure are: x and y, that are vectors spanning a coordinate system, and vx and vy, which are arrays containing the actual vector components in x- and y-direction, respectively.• A file containing the measurements of the boundary force applied to drive deformation. This file is also a *.mat-file, containing a structure F with fields force, velocity and position. These fields are vectors describing the force applied by the indenter, the indenter velocity and the indenter position
spinning wheel Loading next page